aseptconn.ch


Product description

Top Mounted Positioner

The Mark 15 positioner uses the full force of its air supply to drive and maintain the piston or diaphragm in a pneumatic actuator, positioning the valve to what is required by control instrument regardless of the presence of forces that change valve position.
The Mark 15 has feedback circuits designed to measure the position of the actuator’s piston or diaphragm. The positioner then supplies or exhausts air to bring the actuator within the required range for its corresponding control instrument..



Valve Positioners and Accessories MK15

Input
  • 1/4″ – 2″ (DN8 – DN50) 3-15, 6-30, 3-9 or 9-15 psi (0,2-1,0; 0,4-2,1; 0,2-0,6; or 0,6-1,0 bar )
Air Supply Pressure
  • Minimum:  3  psi  (0,2  bar)  above  required  actuator  pressure
  • Maximum:  50  psi  (3,4  bar),  or  as  limited  by  actua-tor
Valve Travel Indication
  • Minimum: 1/16" (1,6 mm)
  • Maximum: 4" (102mm)

Output
  • 0-100% supply pressure
Air Consumption (@20 psi)
  • 0.25 scfm; (@ 1,4 bar: 0.0007N/m3)
Flow Capacity
  • 4.4 scfm (0.125N/m3) (for 3-15 psi output pressure change) (0,2-1,0 bar)
Repeatability
  • 1/2% of full stroke
Sensitivity
  • responds to control air pressure changes as small as 0.1% of full range
Connections
  • 1/4" FNPT
Dimensions
  • 4.65"H x 3.5" Diameter (117,6mm x 88,9mm); external dimensions when mounted
Net Weight
  • 2-1/2 pounds (1,1 Kg)
Features and Benefits
  • Feedback circuits direct the actuator’s position, ensuring adherence to the control instrument signal
  • Range spring capability accommodates a wide variety of valve strokes and instruments spans
  • Can be direct-mounted to top of pneumatic actuator
  • Offers a smaller, more streamlined package with no external linkage
Documents
open close