aseptconn.ch
Products Tubes and Welding Fittings Elbow 88° Elbow 88° / DIN 11865 Row C (ASME BPE) / DT-4.1.1-9 / 316L

Elbow 88° / DIN 11865 Row C (ASME BPE) / DT-4.1.1-9 / 316L

Norms
ASME BPE
Material
316L (Material 1.4435 BN2 available on request)
Surface quality

Electropolished (SF4): Inside ≤ 0.38 µm

Bright finished (SF1): Inside ≤ 0.51 µm

The outer surface has a Ra value ≤ 1,00 μm

Application
open close
  • Pharma & Biotech
  • Food and Dairy
  • Chemical
Marquage
open close

• ASME BPE SF1 or SF4

• Dimension

• Material

• Lot-Nr.

Certificate
open close
Acceptance test certificate acc. EN 10204-3.1
Options
open close
Special dimensions and special materials available upon request.
Aseptconn ASME BPE Catalog
open close

Log in to order Request
Elbow 88° / DIN 11865 Row C (ASME BPE) / DT-4.1.1-9 / 316L
Nominal Size d (mm) S (mm) L (mm) Standard Article Nr
OD 1/2" 12.7 1.65 77.85 DT-4.1.1-9 116.088.A-050.WEL.MB.SF1
OD 1/2" 12.7 1.65 77.85 DT-4.1.1-9 116.088.A-050.WEL.MB.SF4
OD 3/4" 19.05 1.65 77.85 DT-4.1.1-9 116.088.A-075.WEL.MB.SF1
OD 3/4" 19.05 1.65 77.85 DT-4.1.1-9 116.088.A-075.WEL.MB.SF4
OD 1" 25.4 1.65 77.47 DT-4.1.1-9 116.088.A-100.WEL.MB.SF1
OD 1" 25.4 1.65 77.47 DT-4.1.1-9 116.088.A-100.WEL.MB.SF4
OD 1 1/2" 38.1 1.65 96.52 DT-4.1.1-9 116.088.A-150.WEL.MB.SF1
OD 1 1/2" 38.1 1.65 96.52 DT-4.1.1-9 116.088.A-150.WEL.MB.SF4
OD 2" 50.8 1.65 122.17 DT-4.1.1-9 116.088.A-200.WEL.MB.SF1
OD 2" 50.8 1.65 122.17 DT-4.1.1-9 116.088.A-200.WEL.MB.SF4
OD 2 1/2" 63.5 1.65 141.22 DT-4.1.1-9 116.088.A-250.WEL.MB.SF1
OD 3" 76.2 1.65 160.27 DT-4.1.1-9 116.088.A-300.WEL.MB.SF1
OD 4" 101.6 2.11 204.85 DT-4.1.1-9 116.088.A-400.WEL.MB.SF1
OD 1/2" 12.7 1.65 77.85 DT-4.1.1-9 116.088.A-050.WEL.EP.SF4
OD 3/4" 19.05 1.65 77.85 DT-4.1.1-9 116.088.A-075.WEL.EP.SF4
OD 1" 25.4 1.65 77.47 DT-4.1.1-9 116.088.A-100.WEL.EP.SF4