VISCOTEC VHD-Q DISPENSER 1C HYGIENIC DESIGN FOR MULTIPLE FILLERS

Fully Automatic Filling Lines for Liquids: Compact design, short cycle times

The requirements for fully automated filling lines are diverse, but the following applies in all cases: Only an economical system is beneficial. High cycle rates and the required output rate with constantly precise dosing results must be met. This is a challenge, especially when dosing low to high viscosity liquids, and may create critical stages in the process. To achieve an ideal implementation, precise dosing systems are necessary – also in the form of application-specific multiple filling lines for packaging systems.

Multiple liquid filling lines

The multiple liquid fillers must be integrated into the filling lines as easily as possible. Tool carriers or format plates often have narrow tolerances, so a compact design of the dosing valves is necessary. Thanks to their square shape, the dispensers, which dispense regardless of viscosity, can be form-fittingly joined next to each other – with a minimum need for space – and in a modular design. The liquid is supplied via manifolds which are directly connected to the dispenser – without hoses or pipes. In this way, any number of dosing points can be achieved in one “block”.

Optional connection by hose or pipe

The dispensers can also be placed next to the tool carrier and connected to a dosing needle directly above the container via a hose line or pipe. In this way even smaller tolerances are possible. The dosing needle is adapted to the format in terms of length and diameter. A defined string break is achieved by an adjustable suck-back at the end of the dosing process and dripping is prevented. Positive shut-off nozzles or filling valves can also be used to further optimize the dosing time. If required, the dosing components can be temperature controlled via optional heating systems such as heating sleeves or cartridges. This can be particularly advantageous for products with stringy liquids. The dosing result is improved, and the dosing time is kept to a minimum.

Short cycle times of 0.5 seconds

Due to high-performance materials in the filling pumps and powerful servo motors, short cycle times of 0.5 seconds can be achieved for watery to medium-viscosity products. With a dosing accuracy of +/- 99 %. Product or color changes can be easily implemented with optional connections for circulation piping or CIP systems. Circulation may be necessary to prevent sedimentation in solids-laden liquids such as suspensions. The robust dosing systems can also be used in 24/7 production facilities. There they excel, for example, with their high stability and low maintenance. The compact dispenser for multi-lane filling lines can be used for a wide range of applications. Due to its hygienic design, it can be used for food, cosmetics, and for highly viscous medical products, optimally suited for dosing volumes of 0.1 to 20 ml. The economic benefits of fully automated systems depend not only on cycle rate and precision, but also on the diverse variety. This is because it enables a flexible and quick response even with smaller batch sizes and an increased number of batch changes. Thanks to the easy cleanability and the endless piston principle, the VHD-Q dispenser is able to process a wide variety of products with only one dosing system: From liquids to pasty substances – abrasive, sticky or solids-laden. Unnecessary interruptions in production, due to set-up times for replacing entire dosing systems, are a thing of the past.

Your advantages:

• Short cycle times of 0.5 seconds (depending on the material)
• Easy integration in filling lines
• Filling of watery to high viscosity materials
• Optimally suited for dosing volumes of 0.1 to 20 ml
• Quadratic: Compact & hygienic design for multiple fillers with tight depth gauge, square dispenser
• For home care, food, cosmetic and medical applications
• Modular setup with individually adjustable dispenser quantity
• Volumetric dosing, regardless of viscosity
• For low to high viscosity materials
• Particularly suitable for abrasive, filled or shear sensitive materials
• Continuous dosing, pulsation free
• Precise filling with high repeatability
• Linear relation between dosing volume and rotation speed
• Programmable suck-back prevents dripping or stringing of product
• Optional flushing connection for automated cleaning or circulation of dispersions
• Easy integration in automated processes
• Autoclavability of wetted components

Want to Learn More?

For product inquiries or other concerns, we are happy to assist you. Simply share your question via our contact form, and we will get back to you promptly. Would you like to learn more about Aseptconn’s complete product portfolio? Find the right products for pharmaceuticals, biotech, cosmetics, and more in our product portfolio, and find kits for Skids and machines, Tri-Clamp connections, hoses and much more.