Product description
Inline style, manual or air loaded, pressure reducing valves for low flow clean compressed air and gas point of use applications in the biopharmaceutical, pharmaceutical, food & beverage and consumer health & beauty industries.Applications
- Bioreactor/fermenter: sparge gas, purge/blanket/motive force gas for gas regulation
- Separation: purge/blanket/motive force gas for process vessels
- Purification: purge/blanket/motive force gas for process vessels
- Formulation: purge/blanket/motive force gas for process vessels
- Lyophilization: purge gas regulation
- Clean utility: CCG (clean compressed gas) pressure control for post SIP drying of small vessels, tubing, filters, etc.
- F & B consumer H & B process purge/blanket/motive force gas regulation
Pressure Reducing Valve JSRLF
Size
- 1/4″ – 3/4″ (DN8 – DN20)
End Connections
- ASME BPE, DIN and ISO Tri-clamp, Tube weld end and NPT (VCR connections optional – contact factory)
Cv & Flow Characteristics
- Cv 0.012 (0,01) – Cv 0.20 (0,17)
Max Pressure/Temperature
- Tube End & Tri-Clamp 450 psi @ 350°F (31,0 bar @ 177°C) with PEEK seats; 450 psi @ 150°F (30,1 bar @ 66°C) with PTFE seats
NPT: 2165 psi @ 350°F (149 bar @ 177°C) with PEEK seats; 3600 psi @ 150°F (248 bar @ 66°C) with PTFE seats
Setpoint Range
- 1 psi (0,07 bar) to 75 psi (5,2 bar)
Wetted Material
- ASME SA479 316L (UNS 31603) is standard. EN 10272:2000 GR 1.4435, AL-6XN®, Hastelloy C-22 and others are optional
Surface Finish
- ASME BPE SF5, 20Ra (0,5µm) electropolish is standard; Non-EP is optional, as are other finishes
Diaphragm Materials
- Jorlon FDA & USP Class VI
Soft Seat Option
- PTFE, PEEK, EPDM (all materials to FDA and USP Class VI)
Features and Benefits
- Stable outlet pressure setpoint regulation as low as 1 psig (68 mB)
- Top entry design facilitates in-line cleaning and maintenance
- Barstock construction guarantees material integrity and quality surface finish
- Four Cv’s from 0.01 to 0.2 guarantee an application fit
- Large, proprietary Jorlon diaphragm provides exceptionally long life and sensitivity to minimal pressure changes
- Low lock-up with EPDM seat
Note: These valves may be used on non-cavitating liquid or clean steam applications. However, they are not drainable. Steriflow Engineering must review application before acceptance
Documents