Elbow 45° / DIN 11865 Row C (ASME BPE) / DT-4.1.1-4 / 316L

Norms

ASME BPE

Material

316L (Material 1.4435 BN2 available on request)

Surface quality

Electropolished (SF4): Inside ≤ 0.38 µm

Bright finished (SF1): Inside ≤ 0.51 µm

The outer surface has a Ra value ≤ 1,00 μm

Application

Marquage

• ASME BPE SF1 or SF4

• Dimension

• Material

• Lot-Nr.

Certificate

Acceptance test certificate acc. EN 10204-3.1

Options

Special dimensions and special materials available upon request.

Aseptconn ASME BPE Catalog

Elbow 45° / DIN 11865 Row C (ASME BPE) / DT-4.1.1-4 / 316L

Nominal Size	d (mm)	s (mm)	l (mm)	MR (mm)	Standard	Article Nr
OD 1/2"	12.70	1.65	57.20	28.60	DT-4.1.1-4	116.045.A-050.WEL.EP.SF4
OD 3/8"	9.53	1.65	57.20	28.60	DT-4.1.1-4	116.045.A-0375.WEL.EP.SF4
OD 1/4"	6.35	0.89	50.80	14.30	DT-4.1.1-4	116.045.A-0250.WEL.EP.SF4
OD 1/4"	6.35	0.89	50.80	14.30	DT-4.1.1-4	116.045.A-025.WEL.MB.SF1
OD 3/8"	9.53	1.65	57.20	28.60	DT-4.1.1-4	116.045.A-0375.WEL.MB.SF1
OD 1/2"	12.70	1.65	57.20	28.60	DT-4.1.1-4	116.045.A-050.WEL.MB.SF1
OD 3/4"	19.05	1.65	57.20	28.60	DT-4.1.1-4	116.045.A-075.WEL.EP.SF4
OD 3/4"	19.05	1.65	57.20	28.60	DT-4.1.1-4	116.045.A-075.WEL.MB.SF1
OD 1"	25.40	1.65	57.20	38.10	DT-4.1.1-4	116.045.A-100.WEL.EP.SF4
OD 1"	25.40	1.65	57.20	38.10	DT-4.1.1-4	116.045.A-100.WEL.MB.SF1
OD 1 1/2"	38.10	1.65	63.50	57.20	DT-4.1.1-4	116.045.A-150.WEL.EP.SF4
OD 1 1/2"	38.10	1.65	63.50	57.20	DT-4.1.1-4	116.045.A-150.WEL.MB.SF1
OD 2"	50.80	1.65	76.20	76.20	DT-4.1.1-4	116.045.A-200.WEL.EP.SF4
OD 2"	50.80	1.65	76.20	76.20	DT-4.1.1-4	116.045.A-200.WEL.MB.SF1
OD 2 1/2"	63.50	1.65	85.70	95.30	DT-4.1.1-4	116.045.A-250.WEL.EP.SF4
OD 2 1/2"	63.50	1.65	85.70	95.30	DT-4.1.1-4	116.045.A-250.WEL.MB.SF1
OD 3"	76.20	1.65	92.10	114.30	DT-4.1.1-4	116.045.A-300.WEL.EP.SF4
OD 3"	76.20	1.65	92.10	114.30	DT-4.1.1-4	116.045.A-300.WEL.MB.SF1
OD 4"	101.60	2.11	114.30	152.40	DT-4.1.1-4	116.045.A-400.WEL.EP.SF4
OD 4"	101.60	2.11	114.30	152.40	DT-4.1.1-4	116.045.A-400.WEL.MB.SF1