Tri-Clamp elbow 90° / ASME BPE / DT-4.1.1-3 / 316L
Norms
ASME BPE
Material
316L (Material 1.4435 BN2 available on request)
Surface quality
Electropolished (SF4): Inside ≤ 0.38 µm
Bright finished (SF1): Inside ≤ 0.51 µm
The outer surface has a Ra value ≤ 1,00 μm
Application
- Pharma & Biotech
- Food and Dairy
- Chemical
Marquage
• ASME BPE SF1 or SF4
• Dimension
• Material
• Lot-Nr.
Certificate
Acceptance test certificate acc. EN 10204-3.1
Options
Special dimensions and special materials available upon request.
Aseptconn ASME BPE Catalog
Tri-Clamp elbow 90° / ASME BPE / DT-4.1.1-3 / 316L
| Nominal Size | d (mm) | S (mm) | L (mm) | Standard | Article Nr |
|---|---|---|---|---|---|
| OD 1 1/2" | 38.1 | 1.65 | 69.85 | DT-4.1.1-3 | 123.90.A-150.050.BPE.SF1 |
| OD 1" | 25.4 | 1.65 | 50.8 | DT-4.1.1-3 | 123.90.A-100.050.BPE.SF1 |
| OD 3/4" | 19.05 | 1.65 | 41.28 | DT-4.1.1-3 | 123.90.A-075.025.BPE.SF4 |
| OD 3/4" | 19.05 | 1.65 | 41.28 | DT-4.1.1-3 | 123.90.A-075.025.BPE.SF1 |
| OD 1 1/2" | 38.1 | 1.65 | 69.85 | DT-4.1.1-3 | 123.90.A-150.050.BPE.SF4 |
| OD 2" | 50.8 | 1.65 | 88.9 | DT-4.1.1-3 | 123.90.A-200.064.BPE.SF1 |
| OD 2" | 50.8 | 1.65 | 88.9 | DT-4.1.1-3 | 123.90.A-200.064.BPE.SF4 |
| OD 1" | 25.4 | 1.65 | 50.8 | DT-4.1.1-3 | 123.90.A-100.050.BPE.SF4 |
| OD 1/2" | 12.7 | 1.65 | 41.28 | DT-4.1.1-3 | 123.90.A-050.025.BPE.SF4 |
| OD 1/2" | 12.7 | 1.65 | 41.28 | DT-4.1.1-3 | 123.90.A-050.025.BPE.SF1 |
| OD 1/2" | 12.7 | 1.65 | 41.28 | DT-4.1.1-3 | 123.45.A-050.025.BPE.SF4 |
| OD 1/2" | 12.7 | 1.65 | 41.28 | DT-4.1.1-3 | 123.45.A-075.025.BPE.SF4 |
| OD 1/2" | 12.7 | 1.65 | 41.28 | DT-4.1.1-3 | 123.45.A-100.050.BPE.SF4 |
| OD 1/2" | 12.7 | 1.65 | 41.28 | DT-4.1.1-3 | 123.45.A-150.050.BPE.SF4 |
| OD 1/2" | 12.7 | 1.65 | 41.28 | DT-4.1.1-3 | 123.45.A-200.064.BPE.SF4 |
| OD 2" | 50.8 | 1.65 | 88.9 | DT-4.1.1-3 | 123.90.A-300.091.BPE.SF1 |
| OD 2" | 50.8 | 1.65 | 88.9 | DT-4.1.1-3 | 123.90.A-400.119.BPE.SF1 |