Gassing Needle - MAR | Model MR01
These specific Needles are mainly designed for Blow-Fill-Seal machines or to reduce drastically the drying operations of pre-washed vials or other pharmaceutical containers.
We are able to re-design/improve parts or existing systems, to achieve the best results based on the feedback's of our customers.
All types can be produced for every needle:
Flat tip, Scoop tip, Needles with tip shaped like a double flaute mouthpiece, Anti drip tips, Multi holes tips and more.
- 316L Stainless Steel
- Titanium
- Hastelloy C-22
- Plastic: PEEK, Polypropylen, Polycarbonat
- Internal surface: Ra <0.5μm
(including roughness test report) - Outer surface: Polished, complete decontamination & passivation
Customised needle tips are developed to solve or reduce the most common filling problems.
Our design team is able to develop components for any pharmaceutical machine, starting from a sample or initial drawing according to our customers' technical specifications.
Contact us or configure your needle yourself.
All the filling needles are in line with GMP and FDA standards and supplied with the complete 3.1 certification according to
EN 10204.
| OD (mm) |
ID (mm) |
L (mm) |
Needle tip type | Packaging unit | Article Nr |
|---|---|---|---|---|---|
| 1.00 | 0.50 | 120.0 | Flat | 10 pcs. | A7993 |
| 1.50 | 1.00 | 120.0 | Flat | 10 pcs. | A7994 |
| 2.00 | 1.50 | 120.0 | Flat | 10 pcs. | A7995 |
| 2.50 | 2.10 | 120.0 | Flat | 10 pcs. | A7996 |
| 3.00 | 2.50 | 120.0 | Flat | 10 pcs. | A7997 |