SH-Type Safety Klammer m. 6-Kant Mutter
Normen
- DIN 32676-A für Rohr DIN 11866-A (DIN 11850)
- DIN 32676-B für Rohr DIN 11866-B (ISO 1127)
- DIN 32676-C für Rohr DIN 11866-C (ASME BPE-BS 4825)
Anwendung
- Pharma & Biotech
- Lebensmittelindustrie
- Chemie
Material
Klammer aus Edelstahl 316 / 1.4401
(C22 auf Anfrage möglich)
Oberflächenqualität
Metallblank
Ausführung
- Sicherheitsverschluss gegen ungewolltes öffnen der Klammer
- V-Profil für gleichmässige Druckverteilung
- Gelenk mit 2 Bolzen
- Mittlere bis hohe Druckbelastung
Sterilisationstemperatur
150°C
Optionen
Flügel - oder Sechskantmutter
Hinweis
** Maximaler Betriebsdruck wurde unabhängig von der zugeordneten Dichtung (Elastomer) ermittelt
Drucktest Rapporte
- 1.5 SH-Type-Pressure-Test-Report
- DN10_20 SH-Type-Pressure-Test-Report
- 0.5 SH-Type-Pressure-Test-Report
- 1.0_DN25-40 SH-Type-Pressure-Test-Report
- 2.0_DN50 SH-Type-Pressure-Test-Report
- 2.5 SH-Type-Pressure-Test-Report
- 3.0_DN65 SH-Type-Pressure-Test-Report
- 3.5_DN80 SH-Type-Pressure-Test-Report
- 4.0_DN100 SH-Type-Pressure-Test-Report
- 4.5 SH-Type-Pressure-Test-Report
- 5.0 SH-Type-Pressure-Test-Report
- 5.5 SH-Type_DN125-Pressure-Test-Report
- 6.0 SH-Type-Pressure-Test-Report
- 6.625_DN250 SH-Type-Pressure-Test-Report
- 8.0 SH-Type-Pressure-Test-Report
- 8.625_DN200 SH-Type-Pressure-Test-Report
- 10.0_DN250 SH-Type-Pressure-Test-Report
- 10.625-SH-Type-Pressure-Test-Report
- 12.0_DN300 SH-Type-Pressure-Test-Report
- 12.625 SH-Type-Pressure-Test-Report
Drehmoment Angaben
SH-Type Safety Klammer m. 6-Kant Mutter
| ISO 1127 | DIN 11850 | ASME BPE / BS 4825 |
A Dim. TC (mm) |
B (mm) |
L (mm) |
R (mm) |
* Max. Betr. Druck bei 150°C (bar) |
Max. Prüfdruck (bar) |
Artikel-Nr. |
|---|---|---|---|---|---|---|---|---|---|
| DN 6 / 8 / 10 | DN 4 / 6 / 8 / 10 | 1/2" - 3/4" | 25.0 | 17.0 | 75.0 | 50 | 100 | 101.025.SAFX | |
| - | DN 10 / 15 / 20 | - | 34.0 | 17.0 | 85.0 | 50 | 100 | 101.034.SAFX | |
| DN 8 / 10 / 15 / 20 / 25 | DN 25 / 32 / 40 | 1" - 1 1/2" | 50.5 | 17.0 | 102.0 | 50 | 100 | 101.050.SAFX | |
| DN 32 / 40 | DN 50 | 2" | 64.0 | 17.0 | 123.0 | 50 | 100 | 101.064.SAFX | |
| DN 50 | - | 2 1/2" | 77.5 | 17.0 | 140.0 | 50 | 100 | 101.077.SAFX | |
| DN 65 | DN 65 | 3" | 91.0 | 17.0 | 150.0 | 40 | 80 | 101.091.SAFX | |
| DN 80 | DN 80 | 3 1/2" | 106.0 | 17.0 | 165.0 | 40 | 80 | 101.106.SAFX | |
| - | DN 100 | 4" | 119.0 | 17.0 | 185.0 | 35 | 70 | 101.119.SAFX | |
| DN100 | - | 4.5 | 130.0 | 17.0 | 191.0 | 30 | 60 | 101.130.SAFX | |
| - | - | 5" | 144.5 | 19.0 | 215.0 | 30 | 60 | 101.144.SAFX | |
| DN 125 | DN 125 | 5 1/2" | 155.0 | 24.0 | 252.0 | 30 | 60 | 101.155.SAFX | |
| - | - | 6" | 167.0 | 24.0 | 262.0 | 30 | 60 | 101.167.SAFX | |
| DN 150 | DN 150 | 6 5/8" | 183.0 | 24.0 | 280.0 | 25 | 50 | 101.183.SAFX | |
| - | - | 8" | 217.0 | 24.0 | 325.0 | 20 | 40 | 101.217.SAFX | |
| DN 200 | DN 200 | 8 5/8" | 233.5 | 24.0 | 333.0 | 20 | 40 | 101.233.SAFX | |
| - | DN 250 | 10" | 268.0 | 24.0 | 382.0 | 16 | 32 | 101.268.SAFX | |
| DN 250 | - | 10 5/8" | 286.0 | 24.0 | 405.0 | 16 | 32 | 101.286.SAFX | |
| - | DN 300 | 12" | 319.0 | 24.0 | 458.0 | 10 | 20 | 101.319.SAFX | |
| DN 300 | - | 12 5/8" | 338.5 | 24.0 | 463.0 | 10 | 20 | 101.338.SAFX |